To Cancel Recording When Recording Has Already Begun; Language For Digital Broadcast With Multi-Audio Or Multi-Subtitle; Relief Recording; Auto Renewal Recording - Panasonic Diga DMR-EX773 Operating Instructions Manual

∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (
Manually programming timer recordings, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select "Delete" and press [OK].
∫ To release the unit from recording standby
Press [3, 4] to select the programme and press the "Red"
button.
≥The timer icon "F" disappears from the timer recording list.
≥You cannot cancel timer recording standby mode as long as even
one timer icon "F" remains in the timer recording list.
≥Press the "Red" button again to activate timer recording standby.
∫ To resolve overlapping
Press [3, 4] to select the programme with
≥Change or delete the overlapped programme.
∫ To exit the timer recording list
Press [PROG/CHECK].
Note
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
To cancel recording when recording
has already begun
1
While the unit is on
Press [∫].
Stop Recording
Timer recording in progress.
Stop this timer recording ?
It will be cancelled if you stop.
Stop Recording Cancel
SELECT
RETURN
OK
2
Press [2, 1] to select "Stop
Recording" and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
Language for digital broadcast with
multi-audio or multi-subtitle
In timer recording of digital broadcast with multi-audio or multi-
subtitle, audio and subtitle language to be recorded will follow the
setting of "DVB Preferred Language" in the Setup menu (

Relief Recording

When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the "HDD". If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The DIRECT NAVIGATOR shows which programmes were relief-
recorded (" " is displayed.) (
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
24,
and press [OK].
60).
27).

Auto Renewal Recording

[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when daily or weekly timer
recording is selected.
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press [OK].
3
Press [2, 1] to select "RENEW"
column.
4
Press [3, 4] to select "ON" and press
[OK].
Timer Remain HDD 30:24 SP DVD
Recording
TUE 12.10.10. 12:53:00
HDD
Channel Date Start Stop Mode STTL
DVD
OFF
1 ARD SUN 22:00 22:30 HDD SP
All Channels : ARD
Programme Name
Note
≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlist (Video) made from programmes that were set for Auto
Renewal Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may
not be recorded completely.

Notes on timer recording

≥When a timer recording is set, DVDs that were recorded using a
different TV System (PAL/NTSC) cannot be played unless the TV
System is changed in the Setup menu (
recording has completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode ( 45).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Programme Programme
Recorded
1:58 SP
RENEW
ON
63) or the timer
Not recorded
Recorded
VQT2J39
25