Copying Video (Mpeg2) From A Video Equipment - Panasonic Diga DMR-EX773 Operating Instructions Manual

4
When the top menu is displayed
Press [3, 4, 2, 1] to select the title
you want to start copying, and press
[OK].
My favorite
01 02
Chapter 1 Chapter 2
03 04
Chapter 3 Chapter 4
05 06
While playing in order, all the titles after the selected title are
recorded until the set time. (After the last title on the disc has
finished playing the top menu is recorded until the set time is
reached.)
To return to the previous screen
Press [RETURN ].
To stop copying
Press [∫].
You can also press and hold [RETURN
copying.
≥If stopped partway, copying will be up to that point.
Note
≥The screen on the right is recorded at the
beginning.
≥The content is recorded as 1 title from the start of
copy to the end.
≥If play does not begin automatically or if the top
menu does not display automatically, press
[1] (PLAY) to start.
≥Even if you copy a high quality video/audio DVD, the original
picture and audio quality cannot be exactly replicated.
≥If you want to copy a title from a finalised DVD-RW (DVD Video
Recording format), create a copy list and then copy (
Copying using the copying list–Advanced Copy).
01/02
] for 3 seconds to stop
47,
Copying Video (MPEG2) from a video
equipment
Motion pictures encoded in the MPEG2 format, which have been
taken by a Panasonic digital video camera with HDD etc, can be
copied from the camera's HDD to this unit's HDD or DVD-RAM.
(All the recordings on the same date become a title.)
≥You cannot playback SD Video in the camera's HDD with this unit.
You must copy the files to the HDD or a DVD-RAM.
≥You cannot playback or record while copying SD Video.
Video (MPEG2)
USB Cable
Preparation
1 Turn on both this unit and the camera.
2 Connect the camera to this unit with USB cable.
3 Select the appropriate mode that makes the camera ready for
data transfer (such as "PC CONNECT") on the camera.
≥Refer to the camera's operating instructions for detail.
The display automatically appears when you connect the camera
to this unit. ( 28)
1 Press [3, 4] to select "Video ( DivX & MPEG2 )" and press
[OK].
2 Press [3, 4] to select "Copy Video ( MPEG2 )" and press
[OK].
Then go to step 7 on page 47.
USB device
Play Video ( DivX )
Copy Video ( MPEG2 )
≥SD Video on the camera are automatically registered on the copy
list.
≥If there are no SD Video on the camera, "Copy Video ( MPEG2 )"
is not displayed.
VIDEO
§
HDD
DVD-RAM
DVD Video Recording format
§
VQT2J39
49