Table of Contents
Advertisement
Changing the unit's settings
Sound
(All factory default settings are indicated with underlined text.)
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
[On]
Digital Audio Output
Change the settings when you have connected equipment through
this unit's Digital Audio Output terminal (
≥Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings below if
the signals have a sampling frequency of over 96 kHz, or the
disc has copy protection.
[On]
Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with a
sampling frequency of 96 kHz.)
[Off]
Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a
sampling frequency of 96 kHz.)
Dolby Digital
§
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the signal.
Select "PCM" if this unit decodes the signal and outputs it as 2 channels.
≥Not making the proper settings may result in noise.
[Bitstream]
When connected to equipment with a built-in Dolby
Digital decoder.
[PCM]
When connected to equipment without a built-in
Dolby Digital decoder.
DTS
§
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the
signal.
Select "PCM" if this unit decodes the signal and outputs it as 2
channels.
≥Not making the proper settings may result in noise.
[Bitstream]
When connected to equipment with a built-in DTS
decoder.
[PCM]
When connected to equipment without a built-in
DTS decoder.
MPEG
§
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the signal.
Select "PCM" if this unit decodes the signal and outputs it as 2
channels.
≥Not making the proper settings may result in noise.
[Bitstream]
When connected to equipment with a built-in
MPEG decoder.
[PCM]
When connected to equipment without a built-in
MPEG decoder.
Refer to the operating instructions for connected devices to verify
§
whether or not they can decode each of the audio formats.
Audio Mode for XP Recording
Choose the audio type when recording or copying with XP mode.
[Dolby Digital] (
78) [LPCM] (
≥The picture quality of LPCM recordings may be lower than that of
normal XP mode recordings.
≥The audio recording becomes Dolby Digital even if you selected
LPCM when using a recording mode other than XP.
VQT2J39
62
[Off]
9, 67).
78)
Display
(All factory default settings are indicated with underlined text.)
Language
Choose the language for these menus and on-screen messages.
[English]
[Deutsch]
[Español]
On-Screen Messages
Choose the approximate time until the digital channel information
screen (
16) disappears automatically.
The length of time the control panel (
be changed, but "Off" does not work.
[Off] (The digital channel information is not displayed.)
[3 sec.]
[5 sec.]
Unit's Display
Changes the brightness of the unit's display.
This setting is fixed with "Automatic" if you set "Power Save in
Standby" to "On" or "On Timer" (
[Bright]
[Dim]
[Automatic]
The display turns dark during play and disappears
when the unit is turned off. When "Power Save in
Standby" is activated (
while in standby mode is reduced.
Pause Live TV Icon
Select "Off" if you do not want to have the unit show the on-screen
icon while using the Pause Live TV function.
[On]
[Off]
Screen Saver
[On]
When this unit is not operated for approximately 5 minutes
while the screen is being displayed, the screen saver is
displayed. To return to the previous screen, press [OK].
[Off]
FUNCTION MENU Display
[On]
When the unit is turned on, the FUNCTION MENU will be
displayed. (
7)
[Off]
[Français]
[Italiano]
35) is displayed can also
[7 sec.]
[10 sec.]
65).
65), power consumption
- Quick Links:
- Troubleshooting Guide
Hide quick links:
Advertisement
Table of Contents
