Table of Contents
Advertisement
The [DISP/BACK] Button
Standard Display
The items shown in the standard display (
1.
Select [SCREEN SET-UP] > [DISP. CUSTOM SETTING] in the setup menu.
2.
Highlight items and press [MENU/OK] to select or deselect. Selected items are indicated
by a check mark.
[FRAMING GUIDELINE]
[ELECTRONIC LEVEL]
[AF DISTANCE INDICATOR]
[MF DISTANCE INDICATOR]
[HISTOGRAM]
[APERTURE/S-SPEED/ISO]
[EXP. COMPENSATION]
[PHOTOMETRY]
3.
Press [DISP/BACK] to exit when settings are complete.
ELECTRONIC LEVEL
Selecting [ELECTRONIC LEVEL] displays a virtual horizon. The camera is level when the
two lines overlap.
The virtual horizon may not be displayed if the camera lens is pointed up or down.
) can be selected as described below.
[FLASH]
[WHITE BALANCE]
[FILM SIMULATION]
[DYNAMIC RANGE]
[FRAMES REMAINING]
[IMAGE SIZE/QUALITY]
[MOVIE MODE & REC. TIME]
[BATTERY LEVEL]
Advertisement
Table of Contents
