Wireless-B USB Network Adapter
Chapter 6: Driver Installation and Configuration for Windows XP
After connecting the Adapter to your computer, you will install the driver and configure the Adapter.
IMPORTANT: Do NOT run the Wireless-B USB Network Adapter Setup
Wizard. If the Setup Wizard runs automatically after the Setup CD-ROM has
been inserted, click the Exit button.
1. Windows XP will automatically detect the Adapter. Insert the Setup CD-ROM into your CD-ROM drive. Click the
radio button next to Install the software automatically (Recommended). Then click the Next button.
2. The Hardware Installation screen may appear and indicate that the Adapter has not passed Windows Logo
testing. This Adapter has been tested and found to work with Windows XP. Click the Continue Anyway button
to proceed with the installation.
Chapter 6: Driver Installation and Configuration for Windows XP
Figure 6-1: Windows XP - Welcome to the Found
New Hardware Wizard
Figure 6-2: Windows XP - Hardware Installation
14