Internet Parameters (See Page - Panasonic DP-1810F Operating Instructions Manual

For the total system to work properly via LAN, certain information and additional parameters must be set.
Please contact your network administrator for the required information and connection to the LAN.
Important: Make a copy of this page and ask the Network Administrator to complete the required
information. After its returned, transfer the information to the back side of the front cover for future reference
and troubleshooting.
Company Name
Address
Dept.
City
Tel. No.
(1) IP Address:
(2) Subnet Mask:
(3) *SMTP Server Name:
(4) Default Router IP Address:
(5) Email Address:
(6) DNS Server IP Address:
(7) POP Server Name:
(8) POP User Name:
(9) POP Password:
(10) Host Name:
(11) Default Subject:
(12) Default Domain:
1.
2.
3.
4.
5.
(14) Remote Password:
(15) Relay XMT Password:
(16) Manager's Email Address:
(17) Relay Domains (Domains Authorized for Relay Transmission):
1.
2.
3.
4.
5.
1. Items in Bold, depict information obtained from you Network Administrator.
NOTE
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names (items 3 and 7 above). If the DNS Server is not available,
change the Fax Parameter No. 161 (DNS SERVER) to "1:Invalid". Then the machine will
prompt you to enter the IP Address of the SMTP and POP Servers.
3. If required, the MAC Address of your machine can be obtained from the 2nd page of the Fax
Parameter List printout, by pressing
4. Dynamic Host Configuration Protocol (DHCP) is not supported.
Continued on the next page...
Pre Installation Information
User Information

Internet Parameters (See page 26)

or *SMTP Server IP Address:
or *POP Server IP Address:
(13) Selectable Domains:
6.
7.
8.
9.
10.
6.
7.
8.
9.
10.
FUNCTION 6 4
Fax No.
.
SET
15