Panasonic Workio DP-C262 Operating Instructions Manual page 81

5
Select the registered form, and then
select "OK".
For the details about how to register the
form, refer to the Save (see page 82).
When optional hard disk drive is not
installed, the screen of step 5 is not
displayed.
6
Set the order of overlay form and the
scanned original, and then select
"OK".
Overlay Copied with the scanned original
on Top overlaid on the form.
Overlay Copied with the form overlaid on
on Bottom the scanned original.
7
Enter the desired number of copies.
8
Press the Start key.
When copying from the Platen Glass, place
the next original and follow the instructions
described on the touch panel display.
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
81