Auto Zoom - Panasonic Workio DP-C262 Operating Instructions Manual

Auto Zoom

By setting Auto Zoom, originals can be automatically Enlarged/Reduced to fit the size of the loaded
paper.
This function can be selected when the original is placed on the platen.
As the original is placed on the platen, the position of the original may be erroneously detected if influenced by
ambient light.
If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1
Open the ADF more than 45 degrees,
and then place the original on the
platen, leaving it open.
Face Down. Align with top left
corner.
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if set in other
function mode.
3
Select "More Menus".
4
Select "Zoom/Effects", and then
select "Auto Zoom".
51