Panasonic Workio DP-C262 Operating Instructions Manual page 42

2 Select a cover type.
Blank
Copy
3 Select "Cover" to select a paper.
When changing paper other than the cover,
press the Copy key on the Control Panel. If
the paper of desired size is available on the
tray, the display changes.
Select a paper size from the display.
4
Select "OK" to exit the cover settings.
42
Not copied on the cover.
Copied on the cover.
5
Select "OK".
For the following procedure, refer to steps 5
to 6 of Basic Operation for the 2-Sided
Copy Mode (see page 38).