Information - Panasonic CS-YE18NKV-7 Operating Instructions Manual

INFORMATION

FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select Cooling/Heating operation.
After 15 minutes of operation, it is normal to have the following
temperature difference between air inlet and air outlet vents:
Cooling: ≥ 8°C
FOR EXTENDED NON-USE
• Activate Heat mode for 2~3 hours as an alternative to remove
moisture left in the internal parts thoroughly to prevent mould
growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
[Information on Disposal in other Countries
outside the European Union]
These symbols are only valid in the European
Union. If you wish to discard these items,
please contact your local authorities or dealer
and ask for the correct method of disposal.
Attention:
Check the instructions of use of the product confi rming if the polarities (+) and (-) are according
to the indicated direction. Batteries can leak or explode if polarities were inverted, exposed to fi re,
disassembled or recharged.
Avoid mixing with other types of batteries or used batteries, carry or store them unattached, because
it increases the risk of leaking.
Take out the batteries from the product if it were not being used, to avoid possible damage in case
leak happens.
Batteries should be stored in dry and ventilated places.
In case leak happens to the battery, avoid touching it. Wash the affected part of the body with plenty
water. If irritation occurs, look for medical aid.
Don't remove the wrapping of the battery.
Heating: ≥ 14°C
Primary Battery
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG then
please consult authorized dealer under the following
conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote
control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination with
a chemical symbol. In this case it complies with
the requirement set by the Directive for the
chemical involved.
Pb
9