Remote Control - Panasonic CS-YE18NKV-7 Operating Instructions Manual

Indoor / outdoor unit
Table of Contents

Advertisement

Available languages

Available languages

REMOTE CONTROL

Maximum distance: 8m
Press the remote control's button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• The range of temperature for selection is 16°C ~ 30°C.
• Recommended temperature for energy saving:
HEAT mode: 20°C ~ 24°C.
COOL mode: 26°C ~ 28°C.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to temperature
setting, outdoor and room temperature.
• Operation mode is reselected every 30 minutes. During
operation mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
4
TO SELECT FAN SPEED (3 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST VERTICAL AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• If AUTO is set, the louver swing up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position.
6
INDICATOR
(Green)
POWER
6
TO SET THE TIMER
• To turn ON the unit at a preset time, set the timer while
the unit is OFF.
• To turn OFF the unit at a delayed time, set the timer while
the unit is ON.
Press twice → Press repeatedly to set your desired time
• Once the timer is set, the TIMER indication on the remote
control display will be shown.
• To check the remaining time before the timer takes effect,
TIMER
press
.
• To cancel the timer, press
and hold for approximately 3 seconds.
• The timer will also be canceled when you press
when power failure occurs.
• This setting is for one time operation, you will need to set
again each time you want to use the timer.
1
3
5
TIMER
once, then press again
OFF/ON
or
Remote Control display
2
4 4 4 4 4 4 4 4 4
4
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents