7.14. Remove the G-Board and GS-
Board
1. Remove the Front bracket. (See section 7.13.)
2. Remove the screws (×2
3. Remove the screws (×3
4. Remove the Front shield case front.
5. Disconnect the connector (GS52).
6. Remove the screws (×2
7. Remove the Front shield top.
8. Remove the screws (×2
9. Remove the screws (×3
10. Disconnect the connector (G51) and remove the G-
Board.
).
).
).
) and remove the GS-Board.
).
7.15. Remove the Speakers
1. Disconnect the relay connectors
2. Remove the screws (×4
Speaker (L, R).
7.16. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1
each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×7
).
20
each) and remove the