6.22. Remove the S-Board
1. Disconnect the coupler (S1).
2. Remove the screws (×2
frame.
3. Remove the screws (×2
6.23. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×5
each) and remove the stand brackets (left, right).
) and remove the S-Board metal
) and remove the S-Board.
TH-42PV600AZ / TH-42PV600H / TH-42PV600M / TH-42PV600MT
6.24. Remove the GS-Board and SD-
Module
1. Remove the stand bracket R. (See section 6.23.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the coupler (G52).
4. Remove the screws (×3
5. Remove the SD card unit.
6. Remove the screws (×3
cover.
15
).
) and remove the SD card unit