Remove The Su-Board; Remove The Sd-Board; Remove The Ss-Board; Remove The Sc-Board - Panasonic TH-C42HD18 Service Manual

7.6.

Remove the SU-Board

1. Remove the flexible cables (SU1, SU2, SU3 and SU4)
connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (×
7.7.

Remove the SD-Board

1. Remove the flexible cables (SD1, SD2, SD3 and SD4)
connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (×
7.8.

Remove the SC-Board

1. Remove the SU-Board and SD-Board. (See section 7.6.
and 7.7.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (×6
) and remove the SU-Board.
) and remove the SD-Board.
) and remove the SC-Board.
7.9.

Remove the SS-Board

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12 and SS23).
3. Remove a short-jumper connector SS34 and re-use for
new SS-Board.
4. Disconnect the flexible cables (SS53A and SS56A).
5. Remove the molding prop (×1
6. Remove the screws (×5
18
).
) and remove the SS-Board.