Table of Contents
Advertisement
8.
The same hardware wizard shown at step 2 through 7 will open again.
Follow the same procedure.
And then, click [Next] on the wizard shown in Step 1.
9.
Select the [Yes, I want to restart my computer now] option and click [Finish].
10.
To verify that the driver is installed correctly, right-click on [My Computer], select
[Properties], and then select the [Device Manager] tab.
If you can find two [NEC USB Open Host Controller] strings and a [RATOC CB USB
Enhanced Host Controller] string under the [Universal Serial Bus controllers], the driver
is installed correctly.
11.
To connect a USB device, proceed to Chapter 4.Connecting a USB device.
To remove the CBU2 from the PC Card slot, proceed to Chapter 5.Removing the CBU2.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the CBU2 and is the answer not in the manual?