Connecting The Power Cord To The Ac Outlet; Initial Settings - JVC AV28H20EU Instructions Manual

Connecting the power cord to
the AC outlet
Caution
• Operate only from the power source
specified (AC 220 – 240 V, 50 Hz) on the
unit.
Putting the batteries into the
Remote control
Use two AAA/R03 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on your frequency of use.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as necessary.
• If the remote control does not work
properly, replace the batteries.

Initial settings

When the TV is first turned on, it enters the
initial setting mode, and the JVC logo is
displayed. Follow the instructions on the on-
screen display to make the initial settings.
1 Press the Main power button on the
TV
The Power lamp lights red (for power on),
then green (for TV on) and the JVC logo
is displayed.
<AV32X25EU/AV28X25EU>
Power lamp
<AV32H20EU/AV28H20EU>
Power lamp
<AV28CH1EU>
Power lamp
Setting up your TV
Blue
button
Main power
button
Main pow-
er button
Main power button
3