JVC AV28H20EU Instructions Manual page 32

Using the TV's menu
ID
1 Press the 6
TV channel
Every time you press the 6 buttons, the
Programme number (PR) is changed over,
and the picture of the TV channel
registered in the Programme number (PR)
appears on the screen.
2 Press the red button to start the ID
function
3 Press the 6
the first character of a Channel
name (ID) you want to attach to the
TV channel
4 Press the blue button to display the
ID LIST (channel name list)
5 Press the 6
the Channel name (ID)
30
6 buttons to choose a
6 6
6 buttons to choose
6 6
6 buttons to choose
6 6
To cancel the ID function:
Press the h (Information) button.
6 Press the a a button to register a
a a
Channel name (ID) to a TV channel
• You can register your unique Channel
name (ID) to the TV channel. When
step 3 is completed, do not go to step
4, but press the 5 buttons to move
the cursor and the 6 buttons to
choose a character for completing the
Channel name (ID). Then press the
a button to register the Channel
name (ID) to the TV channel.
INSERT
Preparation:
• A CH/CC number unique to this TV and
corresponding to the Channel number of a
TV channel is required. Find the
corresponding CH/CC number from a
table "CH/CC numbers" on page 38 based
on the Channel number of the TV
channel.
• When the COUNTRY setting is not
FRANCE, use a two-digit CH/CC
number. When the COUNTRY setting is
FRANCE, use a three-digit CH/CC
number.
• Only when you add a TV channel
(SECAM-L system) from a French
station, be sure to set COUNTRY to
FRANCE. If the COUNTRY setting is
not FRANCE, follow the description
"Changing the COUNTRY setting" on
page 34 to change the COUNTRY setting
to FRANCE, then start the INSERT
function.
1 Press the 6 6 buttons to choose a
6 6
Programme number (PR) for which
you will register a new TV channel