Choke Cable Inspection And Adjustment - Yamaha WaveRunner GP1200R Service Manual

INSP
ADJ
CONTROL SYSTEM
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left and make sure
that the trolling speed does not increase.

Choke cable inspection and adjustment

1. Check:
Choke lever operation
Incorrect operation → Adjust.
Checking steps:
Check that the choke lever moves back
slightly when it is fully opened.
Check that the inner cable has some
slack when the choke lever is com-
pletely closed.
2. Adjust:
Choke lever operation
Adjustment steps:
Loosen the locknut 1.
Screw the adjuster 2 fully into the
bracket.
Align the choke lever end a within the
line marks b.
Turn out the adjuster 2 until the inner
cable is taut.
NOTE:
If the inner cable is difficult to make taut
using the adjuster 2, adjust the choke
lever so that the cable is taut. The cable
must be taut when the choke lever end
a is positioned within the line marks b.
Reset the adjuster if necessary.
Tighten the locknut 1.
3-4
E