Fuel System; Fuel Line Inspection - Yamaha WaveRunner GP1200R Service Manual

Hide thumbs Also See for WaveRunner GP1200R:
Table of Contents

Advertisement

INSP
ADJ
4
1
3
2
CONTROL SYSTEM/FUEL SYSTEM
3. Adjust:
YPVS cables 1 and 2
Adjustment steps:
Loosen locknuts 1 and 2.
Turn in the adjuster 3 and 4 until
there is slack in the cable.
Align the hole a in the pulley with the
hole in the cylinder.
Insert a 4-mm-diameter pin through
the holes in the pulley and cylinder.
Turn the adjuster 3 and 4 in or out
until the specified slack is obtained.
Turn in
Turn out
Finger tighten the locknut 1 and 2.
Remove the pin.
Start and stop the engine.
Recheck the hole alignment.
If the hole alignment is correctly,
tighten the locknut.
If the hole alignment is incorrect,
repeat the above steps.

FUEL SYSTEM

WARNING
Stop the engine, set the fuel cock to
"OFF" before servicing the fuel system.
When removing fuel system parts, wrap
them in a cloth and take care that no fuel
spills into the engine compartment.

Fuel line inspection

1. Inspect:
Fuel filter 1
Contaminants → Replace.
Cracks/damage → Replace.
Water contamination → Replace and
check the fuel tank.
Fuel hose
Fuel tank
Fuel hoses through part
Fuel filler cap
Cracks/damage → Replace.
3-7
Slack is increased.
Slack is decreased.
E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents