Yamaha WaveRunner GP1200R Service Manual page 200

HULL
HOOD
HANDLEBAR
3. Install:
Throttle cable
NOTE:
Fit the seal into the glove in the bracket.
4. Install:
Band 1
NOTE:
After inserting the QSTS cables into the
grommet, tie the end of grommet with the
band.
5. Install:
Spiral tube 1
NOTE:
Be sure to install the spiral tube, containing
the throttle cable, choke cable and handle-
bar switch lead, at least 50 mm (1.97 in) a
into the steering column.
6. Install:
Handlebar cover 1
NOTE:
When the handlebar cover is in contact with
the steering console cover, adjust the han-
dlebar mount angle so that the clearance a
and b are equal.
8-8
E