Finding New Stations - Dab; Signal Strength Display - Dab - Roberts Concerto2 User Manual

Finding new stations - DAB

As time passes new stations may become available. To fi nd new stations
proceed as follows:-
1. Press and hold the Local scan button. The display will show "Scan-
ning" and will perform a scan of the UK DAB frequencies. As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list.
2. To carry out a full scan of the entire DAB Band III frequencies press
and hold the Full Scan button. The display will show "Scanning". As
new stations are found the station counter on the right-hand side of
the display will increase and stations will be added to the list.

Signal strength display - DAB

1. Press and release the Select button. The lower line of the display
shows signal strength. Position your cd cassette recorder and angle
the telescopic aerial for best reception using the signal strength display
as a guide. The strongest signal is indicated with the largest number
of black rectangles on the signal strength display.
2. The clear unfi lled rectangle indicates minimum signal level required for
satisfactory reception. Press and release the Select button to return
to the previous display mode.
1
2
1,2
8