Battery Operation; Mains Operation - Roberts Concerto2 User Manual

Battery operation

1. Remove the Battery cover on the rear of your CD radio cassette by
pushing the catches in the direction shown.
2. Insert eight LR14 (C size) batteries into the compartment. Take care
to ensure all batteries are inserted with the correct polarity as shown
inside the battery compartment. Replace the battery cover.
3. Reduced power, distortion, and a 'stuttering' sound are all signs that
the batteries may need replacing.
IMPORTANT: The batteries should not be exposed to excessive
heat such as sunshine, fi re or the like. After use, disposable
batteries should if possible be taken to a suitable recycling centre.
On no account should batteries be disposed of by incineration.
We would recommend for economy that your Concerto is used on
the mains whenever possible with battery operation for occasional
or stand-by use only.

Mains operation

1. Place your CD radio cassette on a fl at surface.
2. Plug the mains lead into the Socket located on the rear of your CD
radio cassette. Ensure that the plug is pushed fully into the socket.
3. Plug the other end into a wall socket and switch on.
IMPORTANT: The mains plug is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must
remain accessible during normal use. In order to disconnect the radio
from the mains completely, the mains plug should be removed from
the mains socket outlet completely.
4. When the mains LED is on, it indicates that the radio is connected to
and powered from the mains supply.
5
1
ON
1