Choose A Tv Channel And Watch Images From External Devices - JVC AV-32T5SK, AV-32T5BK, AV-28T5SK, AV-28T5BK, AV-32T5SR, AV-32T5BR, AV-28T5SR, AV-28T5BR Instructions Manual

Choose a TV channel and
watch images from external
devices
• If the picture is tilted, correct it. See
"PICTURE TILT (Only for AV-
32T5SP)" on page 32.
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
• PR 6 → press 6
• PR 12 → press 1 and 2
Use the buttons:
6
Press the buttons to choose
6
the programme number (PR) you
want or an EXT terminal.
Use the o button:
Press the o button to choose
an EXT terminal.
TV mode
Programme
numbers
PR 1 – PR 99
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see "y (S-
VIDEO input)" on page 30.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See "COLOUR
SYSTEM" on page 20.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
EXT modes
EXT-1
EXT-2
or
EXT-3
or
EXT-4
E4
Remote control buttons and functions
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
terminal does not support this
function.)
To return to a TV channel:
Press the b button, the 6 buttons or the
number buttons.
To use the Programme number PR 0
(AV):
When the TV and VCR are connected only
by the Aerial cable, choosing the Programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the Programme number PR 0
(AV) manually. For details, see "EDIT/
MANUAL" on page 25.
Pressing the o button changes the
choice as follows:
TV mode
PR 0
Programme
numbers
PR 1 – PR 99
• The VCR RF channel is sent as the RF
signal from the VCR.
• Also refer to your VCR instruction
manual.
EXT modes
EXT-1
EXT-2
or
EXT-3
or
EXT-4
E4
11