JVC AV-32T5SK, AV-32T5BK, AV-28T5SK, AV-28T5BK, AV-32T5SR, AV-32T5BR, AV-28T5SR, AV-28T5BR Instructions Manual page 74

2 Press the yellow button and set the
y (S-VIDEO input).
Then press the a button
An y (S-VIDEO input) mark is
displayed. You can view an S-VIDEO
signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the y (S-VIDEO input)
setting:
Press the yellow button and turn off y (S-
VIDEO input) mark. The regular video
signal (composite signal) pictures are
resumed.
• The EXT-1 terminal does not support S-
VIDEO signal (Y/C signal) and you
cannot set y (S-VIDEO input) in the
EXT-1 terminal.
• Setting y (S-VIDEO input) changes
the head character from "E" to "S". For
example, "E2" is changed to "S2".
• Even a device which enables the S-
VIDEO signal (Y/C signal) to be output
may output a regular video signal
(composite signal) depending on the
device setting. If a picture cannot appear
because y (S-VIDEO input) setting has
been made, read the device Instruction
Manual carefully again to check for the
device settings.
ID LIST
You can have a name corresponding to the
devices connected for each EXT terminal.
Giving a name to an EXT terminal makes the
EXT terminal number appear on the screen,
together with the name.
1 Press the 5 or 6 buttons to
choose an EXT terminal
2 Press the blue button to display the
name list (ID LIST)
EXT SETTING
EXT-1
DUBBING
EXT-3
EXT-2
EXT-4
TV
TV
D0021-EN
3 Press the 6 buttons to choose a
name. Then press the a button
The ID LIST disappears and the name is
assigned to the EXT terminal.
• You cannot assign an EXT terminal
name not found in the name list (ID
LIST).
To erase a name assigned to the
EXT terminal:
Choose a blank space.
4 Press the a button to complete
the setting
SET UP menu
ID LIST
VHS
S-VHS
DVC
CAM
SAT
OK
31