Watch Images From External Devices - JVC INTERIART AV-28WFX1EU Instructions Manual

Watch images from external devices.

Choosing an EXT terminal or PR 0 (AV) channel.
0
AV
or
• The EXT terminals are registered after the PR 99 channel.
• Pressing
0
AV
TV mode
PR channel
number
To return to a TV channel:
TV
or
When the TV and VCR are connected only by the RF cable, the VCR
RF channel* must be preset to the PR 0 (AV) channel to view VCR
video. Choosing the PR 0 (AV) channel allows you to view images
from VCR video.
Pressing
0
TV mode
PR channel
number
Operating with the Buttons on the TV
(Behind the front cover)
P
or
P
button changes the choice as follows:
EXT modes
EXT-1 EXT-2
EXT-4 EXT-3
P
1
or
4
7
P
button changes the choice as follows:
AV
PR 0 channel
EXT-1
EXT-4
1
Turn the TV on from standby mode.
2
Choose a channel or an EXT terminal.
3
Adjust the volume.
1
Press
The volume level indicator appears.
2
Press –/+ while the volume level indicator is displayed.
Indicator is displayed.
2 3
or
5 6
8 9
0
AV
EXT modes
EXT-2
EXT-3
.
Basic Operation
Notes:
• To use S-Video mode to view in-
put from an S-VHS VCR, see
"To choose S-VIDEO input" on
page 20. When choosing EXT-
2, EXT-3 or EXT-4 input termi-
nals as S-VIDEO input, E2, E3
or E4 changes to S2, S3 or S4 in
the display.
• If you don't have a clear picture
or no colour appears, change
the colour system manually.
(See "Colour System" on page
17.)
• When choosing an EXT terminal
with no input signal, the EXT
number and ID become fixed on
screen.
Note:
• The VCR RF channel is the
channel that is sent as the RF
signal from the VCR. To set the
VCR RF channel to the PR 0
(AV) channel, refer to "Edit/Man-
ual" on page 24. Also refer to the
manual provided with the VCR.
7