Choose A Tv Channel And Watch Images From External Devices - JVC InteriArt HV-36P38SJE Instructions Manual

Remote control buttons and functions
Choose a TV channel and
watch images from external
devices
• If the picture is tilted, correct it. See
"PICTURE TILT" on page 38.
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
• PR 6 → press 6
• PR 12 → press 1 and 2
Use the p p p p p
Press the p p p p p
choose the programme number
(PR) you want or an EXT terminal.
Use the AV button:
Press the AV button to choose an
EXT terminal.
TV mode
Programme
numbers
PR 1 – PR 99
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see "S-IN (S-
VIDEO input)" on page 39.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See "COLOUR
SYSTEM" on page 28.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
16
p buttons:
p p
p buttons to
p p
EXT modes
EXT-2
EXT-1
or
EXT-3
E3
or
EXT-5 EXT-4
or
• This TV set has a function which can
• Since this TV is designed to make full
To return to a TV channel:
Press the b button, the 6 buttons or the
number buttons.
To use the programme number PR 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number PR 0
(AV) manually. For details, see "EDIT/
MANUAL" on page 33.
Pressing the G button changes the choice as
S3
follows:
TV mode
Programme
numbers
PR 1 – PR 99
• The VCR sends its playback image along
the aerial cable as an RF (radio frequency)
signal.
• Also see your VCR instruction manual.
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
and EXT-5 terminals do not support
this function.)
use of the resolution of the original
video source, the motion may appear
unnatural when the video source is
input with 625p progressive-scanning
component signals.
If this happens, change the output
setting of the connected device to 625i
interlace-scanning component signal
output. See the instructions that came
with the device for more information.
EXT modes
EXT-1
PR 0
EXT-5
or
EXT-2
or
EXT-3
S3
E3 or
EXT-4