Additional Functions - Promaster Wireless Remote Shutter User Manual

 3 Continuous Exposures
1. Set the mode switch to the 3 continuous exposure position. Set the camera to single exposure mode.
2. Press the shutter button on the transmitter half way to focus.
3. Press the shutter button completely and the camera will take 3 exposures at an interval of 1s.
 Additional functions
Multiple Cameras
The transmitter is designed to trigger multiple receivers at the same time. This is perfect for those who own
several cameras and want to enhance their creativity.
Use as a wired remote
The receiver may also be used as a wired shutter release button. Press the shutter button on the receiver half
way to focus. Press the shutter button completely to take an exposure.
IMPORTANT NOTE: Some camera and lens combinations take longer to achieve focus lock. Your camera may not
trigger until focus lock has been achieved. If the remote fails to trigger your camera, it is likely that it is due to the fact
that your camera has not achieved focus lock when the trigger signal is received. Switching the remote to the 5S delay
mode will give your camera more time to focus and help the remote to trigger your camera reliably.
ONE YEAR UNCONDITIONAL GUARANTEE
If for any reason, your ProMaster product fails within ONE YEAR of the date of purchase, return the product to
your ProMaster dealer and it will be exchanged for you at no charge. ProMaster products are guaranteed for ONE
FULL YEAR against defects in workmanship and materials. If at any time after one year, your ProMaster product
fails under normal use, we invite you to return it to ProMaster for evaluation and repair.
Made in China
www.promaster.com
Fairfield, CT 06825