Page 3
Turning Ratio Control On/Off - - - - 1 4 llluminator Groups Ratio Setting - - - - - - - - Charging the SM1S ---------- 22 Setting Exposure Compensation - - 15 Setting Custom Functions------ Sp ec ific a tio ns -- - -- -- -- -- --...
Page 4
Precautions •Do not attempt to disassemble, open, or repair this transmitter by yourself. •This product is not water-resistant. Keep it away from rain, snow, and high humidity areas. •Do not touch this device with wet hands. •Avoid corrosive or flammable substances when cleaning this product. °...
Page 18
Channel Selection This is accomplished the same way in both TTL and M modes Please refer to Page 19 for more details)
Page 22
Automatic AF llluminator Setting The SM1S transmitter can support your camera's auto focusing with an automatic AF (Auto Focus) assist beam in low-light conditions. It emits a red-colored beam towards your subject. This is considered "automatic" because it illuminates when the camera actuates it (typically when the shutter button is pressed half-way down).
Page 25
Add a number 4 so [Fn.] changes to [Fn4.]...
Page 26
Specifications Digital FSK 2.4GHz wireless System Type: Channels (A, 1-15) Channels: Range: Approximately 325' / 100 meters Battery: Built-in Li-Ion battery 3. 7V /1 000mAh 3. 7 Wh Charging Voltage: DC 5V / 0.5 A Charging Time: Approximately 2 hours Use Time: At least 20 Hours, starting with a full battery At least 27 Days, starting with a full battery...