Promaster Infrared Remote Shutter Release Operating Instructions

For use with CANON, NIKON, OLYMPUS, PENTAX, SAMSUNG AND SONY cameras.
OPERATING INSTRUCTIONS

IMPORTANT NOTICE

Your ProMaster Remote Control features a POWER SAVE mode. Please
observe the following to ensure proper operation:
1. After initially installing the battery or changing the battery, press and
hold the shutter release button for at least 2 seconds to activate the
remote.
2. The remote will enter the POWER SAVE mode after 8 minutes of
inactivity. To wake the remote from the POWER SAVE mode and
activate it for use, press and hold the shutter release button for at
least 2 seconds.

Identifying the buttons

1. C1, C2 buttons for Canon EOS series cameras
2. A button for SAMSUNG PointShot cameras
3. P button for Pentax K series and Samsung GX series cameras
4. O button for Olympus E system cameras
5. N button for Nikon D series cameras
6. S1, S2 button for SONY Alpha and Nex series cameras
Button
Instant shutter for Canon
C1
Delay shutter for Canon
C2
A Instant shutter for Samsung
P Instant shutter for Pentax and Samsung
O Instant shutter for Olympus
Instant shutter for Nikon
N
S1 Instant shutter for Sony
S2 Delay shutter for Sony
Funtion
1