Remote Control - JVC AV-32920 User Manual

AV Compu Link makes playing video tapes totally automatic. Simply insert a pre - re c o rded tape* into
the VCR, and the VCR automatically turns on and starts playing. At the same time, the VCR sends an
AV Compu Link signal to the television telling it to turn on and switch to the correct video input.
N OT E S :
1) The AV Compu Link cable has a Male 3.5 mm (mono) mini plug on each end.
2) If your JVC brand VCR has A Code/B Code Remote Control Switching (see VCR instructions), using
VCR A Code will switch the TV to Video Input 1. Using B Code will switch the TV to Video Input 2.
3) To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi receiver's
instructions for detailed hookup diagrams.
* In order for AV Compu Link to work, the recording tabs must be removed from the VHS tape.
**AV COMPU LINK EX is compatible with the following 1998 receivers: RX-664, RX-774, RX-884, and RX-1024
and later receiver models.
C O N N E C T I O N S 9