JVC AV-32920 User Manual page 15

The Plug In Menu comes up automati-
cally when you first turn on the TV a f t e r
plugging it in. The Plug In Menu sets the
default pre f e rences for you for:
The Language in which you want the
o n s c reen displays to appear.
The Auto Tuner Setup of channels to
be included in scan.
The Tuner Mode the TV is set to — Air
or Cable.
The time of the TV's Clock.
Once you have set your pre f e rences in
the Plug In Menu section, it will not
appear again unless there is a power
interruption.
Your JVC television allows you to
choose from English, French, or Spanish
o n - s c reen menus and displays.
To LANGUAGE
LANGUAGE ENG
To choose the language
ENGLISH FRENCH
P L U G
During Auto Tuner Setup, the TV w i l l
automatically scan through all available
channels and memorize the active
ones so that when you scan, you do
not pick up weak or noisy channels.
The Programming takes approximately
FRE SPA
Note: You should perform the Auto
SPANISH
Note: Noise Muting will not work
I N
To AUTO TUNER SETUP
To operate
TUNER MODE CABLE
START
To choose CABLE or AIR
To move to START
To start Auto Tuner Setup
NOW
PROGRAMMING!
48
1 to 2 minutes
PROGRAMMING OVER!
Tuner Setup for both Cable and
Air, if you have cable or a
satellite system.
while Auto Tuner Setup is
working.
M E N U
NOTES:
You can exit the
Plug In Menu at
any time by
pressing the E
button on the
remote control. You
can enter the Plug
In Menu any time
by simultaneously
pressing the M
button and V
AIR
"–" button on the
TV's front panel.
5
1
XIT
ENU
OLUME