Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Information function ... 11 ZOOM function... 11 HYPER SOUND function ... 13 Return to TV channel instantly... 13 Operating a JVC brand VCR or DVD player... 13 Teletext function ...14 Basic operation ... 14 Using the List Mode ... 14 Hold...
Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected.
• If the remote control does not work properly, replace the batteries. Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on- screen display to make the initial settings. MENU...
Page 7
AUTO PROGRAM CH 24 D0004-EN • To cancel the AUTO PROGRAM function: Press the b button. After the TV channels have been registered in the Programme numbers (PR), the EDIT menu appears EDIT D0038-EN • You can proceed to edit the...
(ID) to the Programme number (PR) in which the TV channel has been registered. • If a TV channel you want to view is not set to a Programme number (PR), manually set it using the MANUAL function. For details, see “EDIT/ MANUAL”...
TV by a fully wired SCART cable. A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the features described below.
Choose a TV channel Adjust the volume Press the Main power button on the The Power lamp lights red and your TV is in the standby mode. To turn the Main power off: Press the Main power button again.
Turn the TV on or off from standby mode Press the # the TV on or off. When the TV is turned on, the power lamp dims slightly. • The power can be turned on by pressing # (standby) button to turn the b button, 6 buttons or number buttons.
EXT-4 • The VCR RF channel is sent as the RF • Also refer to your VCR instruction • This TV set has a function which can automatically change over the input according to a special signal output from an external device. (The EXT-4 terminal does not support this function.)
Time display: The current time of the teletext data is displayed. If the TV has not received a TV channel that has teletext programmes since it was turned on, the time display is blank. To view the current time, choose a TV channel that has teletext programmes.
Page 14
FULL: This mode uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. Use for pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), you can restore their original dimensions.
Operating a JVC brand VCR or DVD player You can operate a JVC brand VCR or DVD player. Pressing the button having the same appearance as the original remote control button of a device makes the function work in the same way as the original remote control.
Basic operation You can view three types of teletext broadcasts on the TV: FLOF (Fastext), TOP and WST. 1 Choose a TV channel with a teletext broadcast 2 Set the VCR P P DVD switch to the g (Text) position...
To call up a stored page: 1 Press the B B button to enter the List mode 2 Press a colour button having a stored page To exit the List mode: Press the B button again. Hold You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received.
H (Cancel) button to return to a teletext page when the page number is on the screen • The TV mode cannot be resumed even by pressing the H (Cancel) button. A TV programme is temporarily displayed instead of the teletext...
Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully. MENU Basic operation 1 Press the a...
PICTURE menu PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR COLOUR TEMP. FEATURES D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. FEATURES AUTO VNR COLOUR SYSTEM 4:3 AUTO ASPECT D1015-EN AUTO VNR VNR stands for “video noise reduction”. AUTO: This mode reduces any “noise” (interference or snowing) in the current picture. The function also adjusts the optimum sharpness of the picture (SHARP).
Page 22
PICTURE menu 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a a button 4:3 AUTO ASPECT PANORAMIC REGULAR...
“HYPER SOUND function” on page 13. • The HYPER SOUND function works only for the audio signal output from TV channels. It cannot work for the audio signal input from EXT sources. • The HYPER SOUND function affects the audio signal output from the EXT-1 and EXT-2 terminals.
SLEEP TIMER BLUE BACK CHILD LOCK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER. Then press the a a or 3 3 3 3 button A Sub-menu of the SLEEP TIMER function appears.
Page 25
TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen. 5 Press the blue button and set the CHILD LOCK function.
(PR) of a TV channel. This function registers a Channel name (ID) to a TV channel. INSERT: This function adds a new TV channel in the current Programme numbers (PR) list by using the CH/CC number. • You cannot use the INSERT function if you do not know a Channel number of a TV channel.
Page 27
• An EXT terminal number does not appear in the Programme numbers (PR) list. • The CH/CC number is a number unique to the TV and corresponding to the Channel number of a TV channel. For the relationship of a Channel number and a CH/CC number, see “CH/CC numbers”...
Page 28
TV channel Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen. 2 Press the red button to start the ID...
Page 29
INSERT Before performing INSERT operation • A CH/CC number unique to this TV and corresponding to the Channel number of a TV channel is required. Find the corresponding CH/CC number from a table “CH/CC numbers” on page 34 based on the Channel number of the TV channel.
5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to fine- tune the TV channel. If you cannot hear the normal...
Preparation: • At first, read the Device Instruction Manual and “Additional preparation” on page 32 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that an S-VIDEO signal (Y/C signal) can be output to the TV.
Page 32
SET UP menu 2 Press the yellow button and set the y (S-VIDEO input). Then press the a An y (S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal). To cancel the y y (S-VIDEO input) setting:...
EXT-2 terminal. You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.
• Turn off all the devices including the TV. • The “Specifications” on page 37 contains the details of the EXT terminals. If you are connecting a device not listed in the following connection diagram, see the table to choose the best EXT terminal.
Connect the headphones with a stereo mini- jack (of 3.5 mm in diameter) to the headphone jack at the TV rear panel. • No sound comes out from the TV speakers when the headphones are connected. Video/sound signal output from...
CH/CC numbers When you want to use the INSERT function on page 27, find the CH/CC number corresponding to the Channel number of the TV channel from this table. Channel CH 02 CH 03 E3, ITALY A, AU1 CH 04...
• After you have followed the Troubleshooting description or the operating description of the functions concerned without any success, remove the AC plug from the AC outlet and request a repair of your TV. Do not attempt to repair the TV by yourself or remove the rear cover of the TV.
• Have you attempted to use the remote control at the sides or rear of the TV or at a location more than seven meters apart from the TV location? Operate the remote...
AA/R6 dry cell battery × 2 Design and specifications subject to change without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this constitutes an infringement of copyright.