Plug In Menu; Set Clock - JVC AV-32920 User Manual

1 P L U G
6
NOTES:
The Clock is the heart of all timer
functions. You must set the clock
Remember, the
before the On/Off Timer will work.
Plug In Menu will
only appear after
you turn on the TV
for the first time, or
after a power
interruption.
clock with another clock or time signal,
press L
appropriate time, and the clock will start.
Note: If the TV is unplugged or you
CLOCK SET MESSAG E S :
If you do not set the clock but attempt
to use the On/Off Timer anyway, you
I N M E N U
To SET CLOCK
To operate
T I M E – – :– – – –
S TART CLOCK
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK
when done with settings
To start the clock
THANK YOU ! !
If you want to synchronize the TV
or R M arrow at the
EFT IGHT ENU
experience a power outage,
you must reset the clock for
any timer functions to work.
will get the following message:
POWER INTERRUPTED
WOULD YOU SET CLOCK
FIRST ?
Y E S
NO
To YES/NO
Choose YES
Continued above...
Continued from below...
T I M E – –:– – – –
S TART CLOCK
If you choose NO, you will receive
the following message:
YOU CANNOT OPERAT E
ON/OFF TIMER !
Note: If you attempt to "Start Clock"
without setting the time you
will receive this message:
INCORRECT TIME
PLEASE TRY AGA I N
Once you have set up the items in
the Plug In Menu you must select
Finish. Finish tells the TV that you
have selected your personal
default options for the menu and
clock, and unless there is a power
interruption, the Plug In Menu will
not show up again.
To FINISH
To exit and save settings
Note: You can reset the options
available in Plug In Menu via the
regular JVC menu system:
Language is found in the Initial
Setup Menu.
Auto Tuner Setup is found in the
Initial Setup Menu.
Tuner Mode is found in the Initial
Setup Menu.
Set Clock is found in the
Clock/Timers Menu.