Setting Up Your Tv - JVC AV-29MT35, AV-29MT15, AV-29VA15, AV-21MT35, AV-21MT15, AV-21VA15, AV-25MT35, AV-25MT15, AV-25VA15 Instructions Manual

Setting up your TV

CAUTION
• Turn off the equipment including the TV before connecting.
1
Connecting the aerial cable.
VHF/UHF outdoor aerial
Matching aerial
adapter (supplied)
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
Rear of TV
To video
To audio
output output
To S-video
output
VCR
To aerial input
The illustration shown is just a sample. It may not be same as your TV.
(1)
(2)
(3)
VHF/UHF outdoor aerial
AV-29VA15
COMPONENT
VIDEO-1
(VIDEO-2)
OUTPUT
INPUT
INPUT
S
OVER
V
Y
V
/ V
L L / L
C
/ MONO B
MONO
R C R R
R
To RF
output
2
Connecting the compatible main plug to the AC outlet.
3
Inserting batteries into the remote control.
Insert two batteries by following the + and -
polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit
new batteries. The supplied batteries are for
testing, not regular use.
4
Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
JVC logo will appear on the screen again at the phase of "SETUP
TOUR RESTART?" function. Then the initial setting can be
performed according to page 8.
7