Setting Up Your Tv - JVC AV32P10EK, AV32L5EK, AV32P10EI, AV32L5EI Instructions Manual

Setting up your TV

Setting up your TV Setting up your TV Setting up your TV
Connecting the aerial and video cassette recorder (VCR) Connecting the aerial and video cassette recorder (VCR) Connecting the aerial and video cassette recorder (VCR) Connecting the aerial and video cassette recorder (VCR)
I I I I
If you are connecting a VCR, follow
A B C in the diagram opposite.
→ →
If you are not connecting a VCR, follow 1.
• For more details, see the manuals that came with the
equipment you want to connect.
• The connecting cables are not provided.
• You can watch a video using the VCR without doing C.
For details, see your VCR instruction manual.
• To connect more equipment, please see "Further
preparation" on page 37.
• To connect additional audio equipment, see "Using
additional audio equipment" on page 39.
• To connect other equipment (such as a DVD player) with
a digital output terminal for Dolby Digital, see "Listening
to Dolby Digital
AV32P10EI)" on page 38.
• If you connect a decoder to a T-V LINK compatible VCR,
set the DECODER (EXT-2) function to ON. For details, see
"Using the DECODER (EXT-2) function" on page 35.
Otherwise, you will not be able to watch scrambled
channels.
To use the T-V LINK functions, you must have a T-V LINK
compatible VCR connected by a SCART cable C to the EXT-
2 terminal on the TV. For details about T-V LINK functions,
see "T-V LINK functions" on page 7.
Connecting the power cord to the mains outlet Connecting the power cord to the mains outlet
Connecting the power cord to the mains outlet Connecting the power cord to the mains outlet
I I I I
Caution:
• Use only the power source specified on the unit
(AC 220 – 240 V, 50 Hz).
Putting batteries into the remote control Putting batteries into the remote control
Putting batteries into the remote control Putting batteries into the remote control
I I I I
Use two AAA/R03 dry cell batteries.
Insert the batteries holding the - end, making sure the + and
- terminals are correctly lined up.
To open the battery compartment, slide the door downwards
and lift off. Replace the door by sliding it upwards until it
fastens into place.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on
how much you use the remote control.
• If the remote control does not work properly, fit new
batteries.
• The batteries we supply are only for setting up and
testing your TV. Please replace them as soon as you
need to.
• Always use good-quality batteries.
4
audio (Only AV32P10EK and
21-pin SCART
cable
VCR
AV IN/OUT
75-ohm
coaxial
cable
Back of the TV
COAXIAL
DIGITAL
AUDIO IN
OPTICAL
SUB
WOOFER R L
AUDIO OUT
2 3
EXT- EXT-
S S
1
EXT-
SURROUND
REAR
75-ohm
coaxial
cable
To aerial
input
To aerial
output
terminal
Aerial