Table of Contents
Advertisement
Setting up your TV
Caution
• Turn off all the equipment including the TV before connecting anything.
Connecting the aerial
• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
If you connect via a device with an
antenna terminal such as a VCR,
follow A → B → C in the diagram
opposite.
If you connect the antenna
directly to the TV, follow 1.
To use the T-V LINK functions, you must
have a T-V LINK compatible VCR
connected by a SCART cable C to the EXT-
2 terminal on the TV. For details about T-V
LINK functions, see "T-V LINK functions"
on page 11.
• To connect more equipment, please see
"Connecting external equipment" on
page 53.
• To connect additional audio equipment,
see "Connecting speakers/amplifier" on
page 55.
• If you connect a decoder to a T-V LINK
compatible VCR, set the DECODER
(EXT-2) function to ON. For details, see
"DECODER (EXT-2)" on page 41.
Otherwise, you will not be able to watch
scrambled channels.
• When receiving Digital terrestrial
broadcasting (DVB-T), reception can
suddenly be lost if the signal becomes
weak. Use a correctly installed high-
performance antenna.
• When connecting via a device with an
antenna terminal such as a VCR, depending
on the connection method, the signal may
be weakened. If this happens, use a booster
to increase the signal strength.
• In areas with a lot of radio communication
such as near ports or airports, noise may
be introduced into the picture or sound. In
such cases, reception may be improved by
using a high-performance antenna.
• Read the instruction manual of the
devices which you connect to the TV.
For example
Back of the TV
4
EXT-
Y
Pb
L
Pr
R
L
R
21-pin
SCART
Cable
VCR
AV IN/OUT
Terminal
Aerial
75-ohm
Coaxial
Cable
1
EXT-
2
EXT-
S
3
EXT-
S
AUDIO OUT
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output
7
Advertisement
Table of Contents
