Mounting Options
Figure 9. Ram Ball Assembly
Attaching the Ram Ball to the Vehicle Dock
Figure 10. Installing the Ram Ball on the Vehicle Dock
Installation Guide
Ram Balls
3. Use four screws (customer supplied) to secure one of the Ram Balls to
the desired mounting surface. Set the other Ram ball aside to use later in
the assembly process.
4. Re-attach the Ram Ball Assembly to the Ram Ball you just affixed to the
mounting surface.
1. Align the second Ram Ball with the four screw holes on the back of the
Vehicle Dock as shown in Figure 10.
2. Secure the Ram ball to the mounting area using four supplied 8-32 x
5/8" Philips head screws.
Adjustment
Knob
Screws
17