Mounting the Dock
Mounting Options
The RAM Ball mount allows for mounting to flat surfaces or the vehicle
frames using a RAM Ball joint and arm for maximum adjustment options.
Figure 8. Mounting on Powered Vehicle Dock
Components, Materials and Tools
Ram Ball Assembly
16
•
Ram/Ball Assembly (ordered separately)
•
Four 5/8" screws (supplied) and four surface mounting screws (customer
supplied)
•
Philips head screwdriver
1. Loosen the large adjustment knob handle on the Ram Ball assembly.
2. Remove both Ram Balls from the mount as demonstrated in Figure 9.
®
Falcon
4220 Powered Vehicle Dock