Mounting the Dock
Final Assembly
Figure 11. Installing the Vehicle Dock Assembly on the Mount
18
1. Insert the Ram Ball projecting from the back of the Vehicle Dock assem-
bly into the Ram Ball assembly you earlier affixed to the mounting sur-
face (see Figure 11). Tighten the adjustment knob to secure the Ram
Ball in place.
Ram Ball
Ram Ball
Assembly
2. Loosen the Adjustment Knob slightly to tilt the Vehicle Dock to the
desired viewing angle. Re-tighten the Adjustment Knob securely.
3. Route and connect all cables (see "Power and Peripheral Device Connec-
tions" starting on page 11 for more on connections). If you haven't
already prepared the power connection, reference "Electrical Consider-
ations" starting on page 5 for wiring information.
Adjustment
Knob
®
Falcon
4220 Powered Vehicle Dock