Electrical Accessories; Electrical Accessory Matrix - PSC Falcon 4220 Installation Manual

Electrical Accessories

Electrical Accessories
Installation of the PVD may require accessory electronic equipment for proper
and safe operation. Some of this equipment may not be available through
PSC, but could be available through your dealer, forklift parts provider, or
other suppliers.
DC/DC Converter.
+36 and +48 volt battery systems.
DC Conditioner/UPS.
interruptions in battery voltage due to peak loads or disconnect.
Delay Timer.
equipment, to reduce battery drain.
Noise Spike/RF Filter.
spikes on the power system.

Electrical Accessory Matrix

Table 1 summarizes the accessory recommendations and options available
depending on the forklift voltage application. This matrix should be used only
as a reference and may not include accessories for all applications.
Table 1. Electrical Accessories
Accessory
DC/DC Converter
DC Conditioner/UPS
Delay Timer
Noise Spike/RF Filter
5-Amp Dock In-line
fuse
*Ensure that the device being installed is properly rated for use on your vehicle.
Installation Guide
Voltage step down device used to power the PDA from
Used to provide backup DC power during sags or
Provides automatic shut-off of power to a terminal or other
12 volt
Not Required Optional*
Optional* Not Required
Optional* Optional*
Required Required
Required Required
Used to suppress high voltage and RF voltage
Forklift System Voltage
24 volt
Required
Not Required
N/A
Required
Required
36 volt 48 volt
Required
Not Required
N/A
Required
Required
7