Using The Camera; Installing The Battery - FLIR i3 User Manual

11

Using the camera

11.1

Installing the battery

Procedure
Follow this procedure to install the battery:
16
1 Remove the battery compartment cover.
T630174;a1
2 Connect the cable that is attached to the battery to the connector inside
the battery compartment. Note: Do not use conductive tools when doing
this.
T630173;a2
3 Push the battery into place.
4 Replace the cover to close the battery compartment.
Publ. No. T559580 Rev. a486 – ENGLISH (EN) – November 17, 2010