Cadillac 2011 Escalade EXT Owner's Manual page 274

7-84 Infotainment System
Pairing Information
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To connect to a
different paired phone, see
Connecting to a Different
Phone later in this section.
Ofrecido por www.electromanuales.com
Pairing a Phone
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
g
for
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle. See Listing All Paired
and Connected Phones later in
this section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say List.
g
for