Cadillac 2011 Escalade EXT Owner's Manual page 202

7-12 Infotainment System
4. Seek, scan, or tune to the
desired station, to select the
station.
5. Press and hold one of the preset
screen buttons for more than
two seconds or until a beep is
heard.
6. Repeat the steps for each
preset.
Sound Menu
e
(Sound): Press this key or
press the CONFIG control button to
access the Sound menu to adjust
Ofrecido por www.electromanuales.com
the treble, midrange, bass, fade,
balance, and Digital Signal
Processing (DSP). The system
automatically stores audio
adjustment settings as changes
are made for each audio source
including AM, FM, XM (if equipped),
CD, and AUX.
Setting the Tone
TREBLE: Press + or
or decrease the treble. If a station is
weak or has static, decrease the
treble.
MID (Midrange): Press + or
increase or decrease the midrange.
BASS: Press + or
decrease the bass.
Adjusting the Speakers
L/R (Left/Right) (Balance): To
adjust the balance between the left
and the right speakers, press and
hold the L or R screen buttons.
Front/Rear (Fade): To adjust the
fade between the front and the rear
speakers, press and hold the Front
or Rear screen buttons.
Digital Signal Processing (DSP)
The system has Digital Signal
Processing (DSP). DSP provides
a choice of four different listening
experiences. DSP can be used
to increase while listening to the audio system.
Not all DSP modes are available for
all source types. The type of DSP
selected is displayed on the
status line.
to
Select from the following DSP
settings:
to increase or
Normal: Adjusts the audio for
normal mode. This provides the
best sound quality for all seating
positions.