Cadillac 2011 Escalade EXT Owner's Manual page 126

4-10 Storage
Driver Side Shown, Passenger
Side Similar
2. Place the cover on the cargo
box within 10cm (4 in) of the
Midgate and lower the rear of
the panel within 5 8cm (2 3 in)
from the top of the cargo box.
Push the cover forward making
sure that the guide block
engages the retainer bracket
opening. Continue to push
forward until the panel is fully
seated against the Midgate.
Ofrecido por www.electromanuales.com
Then lower the rear of the
cover to engage the striker
pegs (A) to align with the striker
assembly (B).
3. The driver side cargo cover
panel latch must lock in place
before the passenger side latch
can be locked. If this procedure
is not followed exactly, the cargo
cover panels might not correctly
lock in place. Push the driver
side latch toward the front of
the vehicle to lock the cover in
position. A click sounds when
each latch locks. Lock the
remaining passenger side latch
on panel 1.
4. Install cargo cover 2 followed
by 3 next. Place the latches in
the unlocked position. Place the
cargo cover panel on the cargo
area rails while holding the back
of the cargo panel up.