Hautec HFB 6101 Operating Manual page 3

Dear custumer,
This is your manual for the HFB 6101 remote control, a high quality pro-
duct from Hautec. Thank your confidence in Hautec.
This manual will give you basic information how to use the remote control
HFB 6101. The SC 6001 is built into the heat pump, this is operated by
this HFB 6101 remote control. All errors and informations from the HSC
6001 heat pump controller are displayed on this remote control HFB 6101
remote control. Please read the following instructions carefully.
For your safety
All works on the controller and on the heating system (installation, mainte-
nance etc.) must be carried out by a certified technician.
TIP: The controller is pre-programmed. If the timer and temperature valu-
es correspond to the requirements of your installation, then it is not neces-
sary to make a new setting.
Hautec GmbH An der Molkerei 9 D-47551 Bedburg-Hau/ Hasselt
23.05.12
16:56
Manual HFB 6101
1 39.5 °C
20.2 °C
2 33.4 °C 43% RF
Normal heating mode
31
Normal loading mode
Esc
Overview
50.8 °C
23.7 °C
i
We 09:36
Func
Tel.: +49(0)2821-7612-3 Fax: +49(0)2821-7612-76
3
Page of 36