Settings Heating Circuit/Heat-Generator; Password Mb And Password Controller - Hautec HFB 6101 Operating Manual

4 Settings heating cir-
cuit/heat-generator
4.1 Password MB and
Password controller
In order to be able to serve the
following functions
• Settings
• Set and actual values
• Relais outputs
the password MB and the password
of the controller must be entered
successively.
Password MB
1. Select the Settings MB function
with the rotary knob and confirm
by pressing it.
2. Select the Enter
function with the rotary knob and
confirm by pressing it.
3. Set the password with the rotary
knob and confirm by pressing it.
You will get the password from a
technician.
If the password is wrong, the
controller jumps back to step 2.
Password Controller
1. Select the General functions with
the rotary knob and confirm by
pressing it.
2. Select the Enter Password
function with the rotary knob and
confirm by pressing it.
The "Enter Password" function
appears only if first the Password MB
was inserted!
3. Set the password with the rotary
knob and confirm by pressing it.
You will get the password from a
technician.
If the password is wrong, the
controller jumps back to step 2.
The Password MB and Password
controller are different.
Hautec GmbH An der Molkerei 9 D-47551 Bedburg-Hau/ Hasselt
26
Page of 36
Manual HFB 6101
Password
Tel.: +49(0)2821-7612-3 Fax: +49(0)2821-7612-76
23.05.12
16:56