Hautec HFB 6101 Operating Manual page 13

G. Display und operating elements
If the main menu, shown on page 3 and 4, is displayed, you may push softkey 1 or softkey 2 to get the below shown display. If you do not
use the remote control for several minutes, the display will go back to the main menu.
Time bar:
The selected heating program is shown
Normal modus
Economy modus
Time bar
Typical display with
selected heating circuit
Actual heating program
Quick-select-button
Flow temperature
(measured value)
Return temperature
(measured value)
Actual function
Actual selected
controller/unit/circuit
RESET-button
Escape-button
(press only)
Typical display with selected
heating generator
Actual heating mode
Source flow temperature
(measured value)
Source return temperature
(measured value)
Actual function
Actual selected heating generator
Hautec GmbH An der Molkerei 9 D-47551 Bedburg-Hau/ Hasselt
23.05.12
16:56
Manual HFB 6101
39.5 °C
22.3 °C -13.2 °C
Normal heating mode
Unit 2 We 09:36
Esc
HEfiTING CIRCUIT 1
Menu
Adjusting knob (press and rotary)
Adjust value = turn rotary knob
Store value = press knob
Gen. flow temperature
(measured value)
Gen. return temperature
(measured value)
Tel.: +49(0)2821-7612-3 Fax: +49(0)2821-7612-76
Room tempera
ture (measured
value)
Outside
temperature
(measured
value)
Actual function
selectable by
adjusting knob
Actual daytime
13
Page of 36