Select Operating Mode - Hautec HFB 6101 Operating Manual

2.1 Select operating mode

The mode selection can be changed
via the quick-select menu. The
current operating mode selection
is displayed at the bottom on the
standard display.
Example:
1. On the standard display, press
the quick-select
time. > The quick-select menu
appears.
2. Press the mode
function.
3. The current operating mode can
be changed by rotating the rotary
knob.
4. The set operating mode can be
stored by pressing the rotary
knob.
Hautec GmbH An der Molkerei 9 D-47551 Bedburg-Hau/ Hasselt
23.05.12
16:56
Manual HFB 6101
button one
selection
Operating modes:
0: Standby mode
1: Clock program I
2: Clock program II
3: Clock program III
Weekly clock program
4: Normal heating mode
•
5: Economy heating mode
6: Summer mode
7: Manual mode/ emer-
gency mode
• Heating OFF/ Frost protection
• Automatic changeover from normal hea-
• No clock program
• Normal heating/domestic hot water
• No clock program
• Economic heating is carried out
• No domestic hot water heating
• Heating is OFF
• Domestic hot water heating is active
• Frost/room protection function active
• Heat generator continuously ON (as per
• Heating circuit pump continuously ON
• Domestic hot water heating continuously
Check boiler temperature thermostat!
The exact function range can be found in the operating instructions of the
selected control device.
Tel.: +49(0)2821-7612-3 Fax: +49(0)2821-7612-76
ting mode/domestic hot water heating
to economic heating operation
heat¬ing is carried out continuously
according to the setpoint value.
accord¬ing to the setpoint value
according to the weekly clock program
boiler thermostat setting)
ON
Operate the mixer manually! Request
help from an expert!
23
Page of 36