Use Your Speechmike Air; Create A Recording; Playback A Recorded File; Playback Using The Speechmike - Philips LFH3005 User Manual

4

Use your SpeechMike Air

This chapter describes how to use the
SpeechMike with Philips SpeechExec dictation
software. If the SpeechMike is used with third-
party software other than Philips SpeechExec,
some features may not be present or function
differently. For detailed information, refer to the
documentation delivered with the software.
4.1

Create a recording

The docking station or the receiver module
1
must be connected to the computer with
the USB cable.
Press the
2
RECORD
d
recording and enter
• The recorder window is displayed.
• The record indicator light flashes red (in
overwrite mode) or green (in insert mode).
Press the key and start speaking.
3
e
The record indicator light glows in red (in
overwrite mode) or green (in insert mode) while
recording.
For short pauses, press the
4
continue recording, press the
To stop recording, press the
5
Press the
6
• E OL/• • P RIO
recording as finished.
• The dictation file is moved to the
dictations folder.
• The recorder window closes and the work list
window is displayed.
To assign priority status to the recording,
7
press the
• E OL/• • P RIO
a second.
D Note
• For best results, results, speak clearly
and keep the microphone about 5 to 10
centimeters (2 to 4 inches) away from your
mouth.
• The maximum distance between the docking
station and the dictation microphone is 10
User manual
key to create a new
Record standby mode.
key. To
e
key again.
e
key.
RECORD
d
key to mark the
Finished
key again within half
meters (33 feet). If you leave the reception
area of the docking station a vibrating alert
notifies you that the wireless connection
between the docking station and the dictation
microphone may be interrupted. Re-enter the
reception area of the docking station. When
the wireless connection is interrupted, the
dictation software stops recording. See
about wireless connectivity
information about wireless connectivity.
• During recording, the on-screen view
remains on the recorder window, while the
SpeechExec window may be visible in the
background. The SpeechExec
not accept user input until recording is
finished, canceled or suspended.
E Tip
• Click the button on in the recorder
window to adjust the recording volume.
• Use 'Push-To-Dictate' recording to start
recording immediately when pressing the
key on the SpeechMike. When
RECORD
d
releasing the
RECORD
d
stop. 'Push-To-Dictate' can be enabled in the
Settings menu of the SpeechExec Recorder
window (under Audio Settings > Recording).
4.2

Playback a recorded file

Various playback functions can be controlled
by the SpeechMike, in the recorder window or
worklist window.
4.2.1

Playback using the SpeechMike

Double-click the dictation file in the work
1
list or select a dictation file and click the
button on the toolbar.
CONTINUE
The dictation file is opened in the recorder
window.
To rewind, press and hold the
2
Learn
on page 17 for more
window does
key, recording will
key on the
c
19