SECOND ROW SEATS
(GRAND C4 PICASSO)
Each seat can be folded onto the
fl oor to form a fl at surface, thus en-
abling you to modify your vehicle's
interior space.
III
Folding the seat
From the exterior
Pull fi rmly upwards on strap C ,
as indicated by the red arrow, to
unlock the seat; keep pulling un-
til the seat is fully folded.
Push the backrest slightly for-
wards,
so
that
pivots, folding onto the seat
base. The assembly will then
lower onto the fl oor.
62
From the boot (when loading, for
example)
You can fold the second-row seat(s)
from the boot, having fi rst folded the
third-row seats.
Pull on the strap D to unlock the
chosen seat, push the backrest
gently forwards.
To prevent any damage to the
mechanism, the strap D unclips
under excessive force. Simply
reclip it to render the system
operational.
Repositioning the seat
Return the second-row seat bas-
es to their initial position and lock
them in that position.
Raise the backrests and push
them rearwards so that they lock
in position.
Before moving the third-row seats,
Before moving the third-row seats,
Before moving the third-row seats,
Before moving the third-row seats,
Before moving the third-row seats,
Before moving the third-row seats,
Before moving the third-row seats,
Copyright
Copyright
Copyright
return the second-row rigid panels to
return the second-row rigid panels to
return the second-row rigid panels to
return the second-row rigid panels to
return the second-row rigid panels to
return the second-row rigid panels to
return the second-row rigid panels to
return the second-row rigid panels to
return the second-row rigid panels to
their initial position and lock them.
Emergency exit: should the fi rst
system fail (strap C ), the strap D is
the
backrest
available for use by third-row pas-
sengers to accelerate their exit.
Always supervise any move-
ments of seats by children.
C O M F O R T
CITROEN
CITROEN
CITROEN
-
Compiled
Compiled
Compiled
Compiled
Compiled
Rigid panel
Each second-row seat backrest has
a rigid panel attached.
This panel enables you:
-
to have a continuous load sur-
face in the boot, whatever the
positions of the seats,
-
to avoid having objects sliding
under the second-row seats.
Unlocking/Locking the rigid panel
Slide the latch 1 on the plate
downwards, to unlock.
downwards, to unlock.
downwards, to unlock.
by
by
C4owners.org
C4owners.org
C4owners.org
Return the panel to the upright
Return the panel to the upright
Return the panel to the upright
position, then slide the latch 1
upwards, to lock.
Before deploying the rigid panels,
check that the second-row seats are
in the fully back position.
5-seater confi gurations do not have
these rigid panels.